TY  - SER
AU  - Manandhar,Shankar Prasad
AU  - Nanda,Navnit Kumar
AU  - Sadananda,Ramakoti
AU  - Bohez,Erik L.J.
ED  - Federal Republic of Germany (DAAD), 
TI  - Software tools for automated microcode design
T2  - Research studies project report
PY  - 1989///
CY  - Bangkok
PB  - Asian Institute of Technology
KW  - Microcomputers
KW  - Programming
N1  - A research study submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology; Research Studies Project Report (M. Eng.) - Asian Institute of Technology, 1989
N2  - The purpose of this research study is to develop software  tools for generating t. he microcode f:or a given set. or registers  with associated control signals and instruction set with associated microoperations.  Control signals for the microoperations were derived considering the registers involved in the microoperation. The horizontal microinstruction format was obtained and microinstructions for the defined set of instruction was derived. The horizontal microinstruction format was converted to vertical microinstruction  The Control store was then converted to two level store microstore and nanostore and control store memory requirements were compared. Simulation of program with subset of the instructions was carried out in terms of horizontal and vertical microinstruction and the execution time for each was compared.  Software tools for width minimization of microinstruction were also developed and the number of bits required after minimization were compared
UR  - http://203.159.5.9/ait-thesis/detail.php?q=B17790
ER  -