<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Buoyant plume from a line source into a cross section</title>
  </titleInfo>
  <name type="personal">
    <namePart>Pratoom Patarungsi</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Arbhabhirama Anat</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Shuto, Nobuo</namePart>
    <role>
      <roleTerm type="text">Co-Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Shi-igai, Hiroyoshi</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Suphat Vongvisessomjai</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>British Government</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1974</dateIssued>
    <issuance>monographic</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <form authority="marcform">print</form>
    <extent>88 p.</extent>
  </physicalDescription>
  <abstract>The buoyant plume from a line source into a cross-section was studied, using the integral technique of analysis. Using similarity law, the jet trajectories and dilution ratio can be predicted and the required coefficients can also be found. The results of this investigation will enable further investigations to be made for· the design of waste disposal systems  effluent into the ocean or' waste gases into the atmosphere.  The present study based upon the assumption made by Fan and Shute. Numerical solutions were presented for a range of initial conditions. Experiments were conducted for the variation of the dilution ratio and for  photographic observations of the trajectories of dyed jets.  The problem of a buoyant jet from a line source into a cross-section was analyzed by assuming an entrainment mechanism based on the vector  difference between the characteristic jet velocity and the ambient velocity.  Experiments with sinking jet which are directly analogous to buoyant jet were performed. Salt solutions were injected into a fresh flowing water at the free surface in the flume. Jet trajectories and dilution ratios  were obtained from titrating the samples. The coefficient of entrainment was found to vary from 0.04 to 0.24 and the drag coefficient was between  0. 9 to l. 2.</abstract>
  <note>A thesis submitted in partial fulfillment of the requirement for the degree  of Master of Engineering of the Asian Institute of Technology, Bangkok,  Thailand. </note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1974</note>
  <subject authority="lcsh">
    <topic>Plumes (Fluid dynamics)</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. 654</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B24200</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B24200</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">241297</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260817171917.0</recordChangeDate>
  </recordInfo>
</mods>
