01795cas a2200241 a 450000500170000000800410001703500150005810000190007324500690009226000520016130000110021349000270022450001560025150200580040752007210046565000170118670000380120370000550124170000470129671000860134381000590142985600650148820260818085206.0110910s1985    th uu|m rtt   0|  a1eng d  a.b101727130 aViboon Thepent10aCorn drying simulation in a cylindrical bin with radial air flow  aBangkok :bAsian Institute of Technology,c1985  a118 p.1 aThesis ;vno. AE-85-19  aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Environment, Resources and Development  aThesis (M.Eng.) - Asian Institute of Technology, 1985  aTwo models were developed to simulate the drying of corn in cylindrical bin with radial air flow. The first model was semi-empirical in nature whilst the second employed the near equilibrium simulation approach. This study was considered the prediction of grain moisture and temperature changes at any point in a bin and at any time when drying was being carried out. The inlet air conditions were changed continuously during the test periods. A system of equations for prediction these changes was presented, methods of determining the relevant physical properties were considered, and step by step solution by means of a digital computer is given. The computed results were compared with experimental observations. 0aCornxDrying1 aJindal, Vinod Kumar,eChairperson1 aIllangantileke, Sarath G., eExamination Committee1 aGupta, Chandra P., eExamination Committee2 aCarl Duisberg-Gesellscnaft (CDG) Federal Republic of Germany, eScholarship Donor2 aAsian Institute of Technology.tThesis ;vno. AE-85-19  3Full-Textuhttp://203.159.5.9/ait-thesis/detail.php?q=B19950