Busaba Limsombutanan creator Bohez, Erik L.J. Chairperson Duflou, Joost R. Examination committee Pandey, P.C. Examination committee Hasin, M. Ahsan Akhtar Examination committee text th Bangkok Asian Institute of Technology 1997 monographic eng

print

226 p. Today, the most advanced machining of free from surfaces is done in 5-axis machining which · can reduce the machining time. However, the machine stiffhess, the difficulty in cutter selection and tool orientation still remain problems. This study presents an algorithm to select the cutter size and tool orientation for machining features in surface machining which can be combined with a holonic controller of a 5-axis machine. The milling surface is divided in to three phases, namely, roughing, semi-roughing and finishing by using Unigraphics system to generate tool paths. Mastercam is also investigated but found unsuitable. This algorithm is used to support in process planing of finishing of a parametric bi cubic surface. Machining with the suitable tool diameter and optimal tool angle will improve surface quality and can reduce machining time. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Advanced Technologies Thesis (M.Eng.) - Asian Institute of Technology, 1997 Computer integrated manufacturing systems Asian Institute of Technology. http://203.159.5.9/ait-thesis/detail.php?q=B14396 http://203.159.5.9/ait-thesis/detail.php?q=B14396 20260818085634.0