<?xml version="1.0" encoding="UTF-8"?>
<record
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd"
    xmlns="http://www.loc.gov/MARC21/slim">

  <leader>02447nam a2200265 a 4500</leader>
  <controlfield tag="005">20260817161805.0</controlfield>
  <controlfield tag="008">                                        </controlfield>
  <datafield tag="035" ind1=" " ind2=" ">
    <subfield code="a">.b12341769</subfield>
  </datafield>
  <datafield tag="100" ind1="1" ind2=" ">
    <subfield code="a">Nguyen, Van Son</subfield>
  </datafield>
  <datafield tag="245" ind1="1" ind2="0">
    <subfield code="a">Aerodynamic interference effects of surrounding buildings on a tall building with 3d coupled modes</subfield>
  </datafield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="a">Pathumthani :</subfield>
    <subfield code="b">Asian Institute of Technology,</subfield>
    <subfield code="c">2009</subfield>
  </datafield>
  <datafield tag="300" ind1=" " ind2=" ">
    <subfield code="e">1 online resource</subfield>
  </datafield>
  <datafield tag="500" ind1=" " ind2=" ">
    <subfield code="a">A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering in Structural Engineering, School of Engineering and Technology</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a"> The interference effects from one and many neighboring buildings that do not have identical shapes on tall buildings with complex configuration and vibration mode shapes are studied by a series of wind tunnel tests and numerical analysis. Moreover, to have a more practical view, two real building cases will be investigated in this study to understand about aerodynamic interference effects of surrounding buildings on the principle buildings having complex geometry and vibration characteristics (3D coupled modes). The results show that the 3D coupling analysis slightly influences responses of the first building having lowcoupled effects, but it significantly affects responses of the second building having highcoupled effects. The interfering effects on the buildings{u2019} responses such as displacements and accelerations are investigated by computing interference factors (IF). The shielding, channeling effects and vortex-shedding phenomenon also occur due to the presence of interfering building(s). The shielding and vortex-shedding phenomena have stronger effects on responses of the first building. Namely, while shielding effects reduce the maximum lateral displacements about 2.0 times, highly turbulent wind forces induced by vortex-shedding phenomenon from upstream building increase the maximum acceleration about 3.26 times.</subfield>
  </datafield>
  <datafield tag="650" ind1=" " ind2="0">
    <subfield code="a">Tall buildings</subfield>
  </datafield>
  <datafield tag="700" ind1="0" ind2=" ">
    <subfield code="a">Pennung Warnitchai,</subfield>
    <subfield code="e">Chairperson</subfield>
  </datafield>
  <datafield tag="700" ind1="1" ind2=" ">
    <subfield code="a">Anwar, Naveed,</subfield>
    <subfield code="e">Examination Committee</subfield>
  </datafield>
  <datafield tag="700" ind1="0" ind2=" ">
    <subfield code="a">Noppadol Phien-Wej,</subfield>
    <subfield code="e">Examination Committee</subfield>
  </datafield>
  <datafield tag="710" ind1="2" ind2=" ">
    <subfield code="a">Netherlands Ministry for Development Cooperation,</subfield>
    <subfield code="e">Scholarship donor</subfield>
  </datafield>
  <datafield tag="856" ind1=" " ind2=" ">
    <subfield code="3">Full-Text</subfield>
    <subfield code="u">http://203.159.5.9/ait-thesis/detail.php?q=B04774</subfield>
  </datafield>
  <datafield tag="907" ind1=" " ind2=" ">
    <subfield code="a">.b12341769</subfield>
    <subfield code="b">mnait</subfield>
    <subfield code="c">j</subfield>
  </datafield>
  <datafield tag="902" ind1=" " ind2=" ">
    <subfield code="a">240423</subfield>
  </datafield>
  <datafield tag="998" ind1=" " ind2=" ">
    <subfield code="b">0</subfield>
    <subfield code="c">200108</subfield>
    <subfield code="d">m</subfield>
    <subfield code="e">a  </subfield>
    <subfield code="f">j</subfield>
    <subfield code="g">0</subfield>
  </datafield>
  <datafield tag="999" ind1=" " ind2=" ">
    <subfield code="c">2679</subfield>
    <subfield code="d">2679</subfield>
  </datafield>
</record>
