02054nas a2200313 a 4500 20260818090847.0 230830s2012 th a ||| 000 eng d .b1241153x Charusluk Viphavakit Development of integrated optical characterization bench for sensing Microfluidic channel Pathum Thani : Asian Institute of Technology, 2012 60 leaves : ill. Thesis (M. Eng.) - Asian Institute of Technology, 2012 A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering in Nanotechnology This work introduces design, fabrication and characterization of an optical based integrated flow rate sensor where the light- fluid interaction is maximized by allowing the liquid and light to propagate along the same direction. This is achieved by placing a 10 {uF06D}m deep channel between two waveguides. The optical waveguides are tapered down to the channel width to feed the light in and out, where tapering is done to minimize the coupling and propagation loss. The output signal is detected by a fast receiver (higher than 1MHz) that records the dynamic change of the light intensity when fluid flows through the channel. This scheme allows for the direct measurement of the liquid flow rate with higher interaction length between fluid and light. The initial results showed a dynamic range of measurement up to 0.18. Microfluidic devices Optical Devices Integrated optics Dutta, Joydeep, Chairperson Mohammed, Waleed S., Examination committee Hornyak, Gabor L., Examination committee Poompat Saengudomlert, Examination Committee Royal Thai Government Fellowship Scholarship Donor Full-Text http://203.159.5.9/ait-thesis/detail.php?q=B05138 .b1241153x mnait m 240419 0 230830 m a m 0 29355 29355