<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Development of rapid setting and self-compacting repair concrete</title>
  </titleInfo>
  <name type="personal">
    <namePart>Lu Min Thant</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Pennung Warnitchai</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Thanakorn Pheeraphan</namePart>
    <role>
      <roleTerm type="text">Co-Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Raktipong Sahamitmongkol</namePart>
    <role>
      <roleTerm type="text">Examination Committee </roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Anwar, Naveed</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>Loom Nam Khong Pijai  (Greater Mekong Subregion) Scholarships</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor </roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <genre authority="marc">series</genre>
  <genre authority="marc">technical report</genre>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Pathum Thani, Thailand</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>2021</dateIssued>
    <issuance>continuing</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>74 leaves : ill. </extent>
  </physicalDescription>
  <abstract>This thesis was conducted to come up with Rapid Setting and Self-compacting Repair  Concrete. The amount of cement, silica fume, and superplasticizer used in this study  were carefully chosen based on literature research, pre-screening tests, and  recommendation by suppliers to obtain the desired fresh properties of self-compacting  concrete and desirable compressive strength at 7 hours. Slump flow test for flowability,  V funnel test for viscosity, L box test for passing ability and penetration resistance for  setting time were performed to test on fresh characteristics. For hardened properties,  compressive strength at 7 hours, bond strength at 7 days, shrinkage at 28 days were  checked. Two level full factorial design with center points was utilized as Design of  Experiments (DOE) to analyze the results. Water-cement ratio, percentage of expansive  additives content and percentage of silica fume content are selected as factors to  investigate their effects on fresh and hardened properties of Rapid Setting and Self compacting Repair Concrete. All fresh and hardened characteristics of Rapid Setting  and Self Compacting Repair Concrete were significantly influenced by the effect of  silica fume except for L box test and free shrinkage test. A higher silica fume and  expansive additive gives better results in mechanical properties of Rapid Setting and  Self-compacting Repair Concrete. A mockup was performed to check whether the  proposed mix design could be utilized on a real site. According to mockup test, Rapid  Setting and Self-compacting Repair Concrete can give the good performance without  cracking until 28 days and afterwards while the public is successfully using and passing  over the repair mockup. As an additional work, Rapid Setting Repair Concrete was also  developed and compared with commercial product which is available in Thailand. The  developed Rapid Setting Repair Concrete possesses better workability and higher  compressive strength at five hours than the commercial product.  </abstract>
  <note>A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering in Structural Engineering, School of Engineering and Technology</note>
  <note>Thesis (M. Eng.) - Asian Institute of Technology, 2021</note>
  <subject authority="lcsh">
    <topic>Self-consolidating concrete</topic>
    <topic>Additives</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. ST-21-11</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B15698</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B15698</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">220211</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260818090912.0</recordChangeDate>
  </recordInfo>
</mods>
