<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <nonSort>An </nonSort>
    <title>economic comparison of paddy drying in shallow beds using natural and heated air</title>
  </titleInfo>
  <name type="personal">
    <namePart>Solis, Norman Tolentino</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Jindal, Vinod Kumar</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Vokes, Richard W. A.</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Exell, Robert H.B.</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>The ASEAN-USAID</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <genre authority="marc">series</genre>
  <genre authority="marc">technical report</genre>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1982</dateIssued>
    <issuance>continuing</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>77 p.</extent>
  </physicalDescription>
  <abstract>A series of paddy drying tests were conducted in a flat bed dryer using heated and unheated-air to compare the drying costs, moisture removal rates and the milling quality. The grain depth was 0.30 meter and the airflow rates were 7.64 and 9.16 cubic meter-min/square meter. A temperature of 43.0°c was maintained in the heated-air drying tests. The initial moisture contents of the paddy were 20.0 and 22.0% wet basis.  The experimental and the simulated moisture removal rates in heated-air and unheated-air were in good agreement statistically showing that the drying models could be effectively used in the economic analysis. The heated-air drying was more economical than unheated-air drying due  to the extended period of drying needed with unheated-air.  It was found that a 3-horsepower engine would give the m1n1mum drying costs for the unheated-air, but heated-air drying costs always increased with increase in engine horsepower, The ratio of the unheated-air to heated-air  drying cost varied in the range 2:1 to 3:1 depending on the engine horsepower applied.  The quality of the paddy dried with unheated-air was significantly better than the quality of paddy obtained in the heated-air tests. However, the  possible premium due to improvement of the quality dried with unheated-air was not included in the economic analysis due to the uncertainties in the present marketing practices in the Philippines.</abstract>
  <note>A thesis submitted in partial fulfilment of the requirement for the degree of Master of Engineering, School of Environment, Resources and Development</note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1982</note>
  <subject authority="lcsh">
    <topic>Rice</topic>
    <topic>Drying</topic>
    <topic>Economic aspects</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. AE-82-17</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B21140</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B21140</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">110908</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260818094537.0</recordChangeDate>
  </recordInfo>
</mods>
