<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Effect of anisotropic preconsolidation on the strength characteristics of a normally consolidated clay</title>
  </titleInfo>
  <name type="personal">
    <namePart>Uthai Pamchareon</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Brand, E.W.</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart> Chai Muktabhant</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Moh, Za-Chieh</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>Asian ·Institute of Technology</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1972</dateIssued>
    <issuance>monographic</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <form authority="marcform">print</form>
    <extent>88 p.</extent>
  </physicalDescription>
  <abstract>An experimental investigation was carried out to study the  effects of anisotropic preconsolidation on the strength characteristics of three artificially sedimented, normally consolidated clays. Sediments of Soft Bangkok Clay in the three different solutions of calcium chloride, sodium chloride and distilled water were preconsolidated under Ko conditions by vertical pressures  ranging from 10 to 80 lb/ in2 before isotropic CU triaxial tests  were carried out. The experimental evidence collected from this short investigation is conclusive in proving that the existing laboratory triaxial technique does not give unique strength behaviour for a  particular normally consolidated clay. It is clear that the strength characteristics, as determined from specimens consolidated isotropically in the .triaxial cell, are affected by the anisotropic stress conditions imposed on the clay prior to sampling where the laboratory consolidation pressure is considerably higher than the maximum past pressure, the effects of the prior  anisotropic consolidation is not important. These effects are  only significant where Ō vm  is small and where  Ōc/Ōvm  approaches unity. This conclusion appears to be independent of the structure produced in the clay by the process of sedimentation.</abstract>
  <note>A thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering at the Asian Institute of Technology, Bangkok, Thailand.</note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1972</note>
  <subject authority="lcsh">
    <topic>Soil consolidation</topic>
  </subject>
  <subject authority="lcsh">
    <topic>Shear strength of soils</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. 379</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B24304</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B24304</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">011297</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260818094848.0</recordChangeDate>
  </recordInfo>
</mods>
