Hameed, Tahir creator Prida Thimakorn Chairperson Tawatchai Tingsanchali Examination Committee Wang, Tsan-Wen Examination Committee Canadian International Development Agency Scholarship Donor text th Bangkok Asian Institute of Technology 1986 monographic eng

print

78 p. High velocity flow in hydraulic structures tends to deflect the water stream from the surf ace and forms a low pressure zone beneath it. Due to low pressure, "cavitation" occurs which is the formation and collapse of vapor bubbles in a liquid. Compared to other methods, air entrainment into the flow to prevent cavitation by an aeration device is effective and more economical. But at present, no standard criteria is available for the design of aeration devices and the space interval between them. In the present study, al together sixteen (16) square type grooves with deflectors were experimentally tested in a steep slope rectangular open chute. Mainly, two sizes of grooves, that is, 5 cm and 7 . 5 cm with square cross-section were chosen and each one was tried with various deflector angles. Air concentration was measured downstream of the device along the centreline of the chute by an air-water concentration meter. A relationship which can help in the assessment of the effectiveness of the square grooves with deflectors was derived using different dimensionless parameters. The design criteria for the selection of spacing between this particular type of aeration device was also established and is valid only within the range of the study. A thesis study submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology Thesis (M.Eng.) - Asian Institute of Technology, 1986 Water Air entrainment Asian Institute of Technology. http://203.159.5.9/ait-thesis/detail.php?q=B19781 http://203.159.5.9/ait-thesis/detail.php?q=B19781 210598 20260817162014.0