02333nam a2200241   450000500170000000800410001703500150005810000240007324500760009726000520017330000270022549000270025250001440027950200580042352012350048165000600171670000350177670000440181170000490185571000630190481000590196785600650202620260817162140.0220698         th                  eng    a.b1006719x0 aVirush Teeraseranee10aAlternative approaches for energy conservation in a sanitary-ware plant  aBangkok :bAsian Institute of Technology,c1981  a1 v. (various pagings)1 aThesis ;vno. IE-81-17  aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering. School of Engineering and Technology  aThesis (M.Eng.) - Asian Institute of Technology, 1981  aThe study reported herein is concerned with the energy conservation problem and the peak demand reduction of electricity in a sanitary-ware  factory. It deals with the problem of determining what conservation measures are applicable to this factory, what the possible saving could  be and how to reduce peak demand of electricity. Data and information related to the energy consumption of the factory were first collected and analyzed to arrive at estimates for the energy used per unit production  and also to assist in the energy analysis of the factory. The areas where energy conservation measures could be taken have been identified. Economic evaluations have been performed and the potential saving estimated. Two models have been developed to plan the reduction of the peak demand. The first is a mathematical model which can be used to determine how to reschedule the deferable loads. The solution procedure of this model uses  linear programing techniques. The second model determines the optimal  time delays needed between the successive starting of each piece of  equipment when work resumes after a power failure, if the maximum allowable  peak demand is to be kept within an upper limit prescribed by the management. 0aSanitary supply industryxThailandxEnergy conservation0 aPakorn Adulbhan, eChairperson1 aTang, John C.S., eExamination Commitee1 aTabucanon, Mario T., 3Examination Committee2 aGovernment of the Republic of Germany, eScholarship Donor2 aAsian Institute of Technology.tThesis ;vno. IE-81-17  3Full-Textuhttp://203.159.5.9/ait-thesis/detail.php?q=B21743