Evaluation of some physico-chemical processes for treating textile wastewater
- Bangkok : Asian Institute of Technology, 1974
- 100 p.
- Thesis ; no. 632 .
- Asian Institute of Technology. Thesis ; no. 632 .
A thesis submitted-in partial fulfillment of the requirements for the degree of Master of Engineering in the Asian Institute of Technology, Bangkok, Thailand.
Thesis (M.Eng.) - Asian Institute of Technology, 1974
Several physico-chemical processes were studied in treating the high color, low BOD textile wastewater from a synthetic textile factory using polyester and rayon as raw materials. Among these processes are series filtration using shredded coconut husk fiber and burnt rice husk as filter media, granular and/or powdered activated carbon adsorptions, and chemical coagulation. Both series filtration and carbon adsorption were found ineffective due to poor color removal efficiency and short operational time. Chemical coagulation using alum as coagulant was found capable of removing 90% of color and 50% of COD at pH of 6.0 and dosage of 200 mg/l for a representative composite sample. 0.4 mg/l of Sanpolymer A510 was used as a coagulation aid to accelerate the settling of the precipitants. A. survey of the in-plant wastewater and an appraisal of-different treatment systems for the generated wastewaters was also made as part of the study.
Water--Pollution Textile waste Factory and trade waste