<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Experimental evaluation of recent consolidation theories using soft Rangsit clay</title>
  </titleInfo>
  <name type="personal">
    <namePart>Karunakaran, Suppiah</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Brenner, R.P.</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Balasubramaniam, A.S.</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Onodera, T. F.</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>The Government of United Kingdom</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <genre authority="marc">series</genre>
  <genre authority="marc">technical report</genre>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1977</dateIssued>
    <issuance>continuing</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>185 p.</extent>
  </physicalDescription>
  <abstract>After reviewing and classifying consolidation theories, three recent models, namely those of Gibson &amp; Lo, Barden and Garlanger were investigated  using soft Bangkok clay from Rangsit. Samples were tested in the Bishop and Rowe type hydraulic oedometers with pore pressure measurement using  four different values of load increment ratio and load increment duration and three values of sample thickness.  Gibson &amp; Lo's and Barden's parameters were evaluated from the data obtained in the secondary compression range. Both settlements and pore pressures were then generated for the whole time duration observed using the experimentally,4etermilned, values. The comparison of these generated values with the observed ones showed that the generated pore pressures did not agree for either of the two models, whereas the generated settlements gave a fairly  good agreement over the whole time range for the Gibson &amp; Lo model. For the Barden model, a reasonable agreement was only obtained in the secondary  compression range. Garlanger1s parameters were obtained utilizing the experimental observations from the entire time range. In this case, parameters evaluated from step loading produced rather poor agreement with parameters obtained from a test simulating in-situ loading. Clear trends in the effect of load increment ratio, load increment duration and sample thickness on the different model parameters characterizing  the three theories considered could be recognized only in a few cases.</abstract>
  <note>A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering of the Asian Institute of Technology, Bangkok, Thailand</note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1977</note>
  <subject authority="lcsh">
    <topic>Soil consolidation test</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. 1008</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B23121</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B23121</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">090421</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260818113036.0</recordChangeDate>
  </recordInfo>
</mods>
