TY  - BOOK
AU  - Chin,Chee-kiong
AU  - Ueda,Tamon
AU  - Pichai Nimityongskul,
AU  - Sritawat Kitipornchai, 
ED  - The Royal Thai Government, 
TI  - Experimental study on plate shear connector for composite construction
T2  - Thesis
PY  - 1988///
CY  - Bangkok
PB  - Asian Institute of Technology
KW  - Plates (Engineering)
KW  - Composite construction
N1  - A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology; Thesis (M.Eng.) - Asian Institute of Technology, 1988
N2  - The capacity and failure mode of plate shaped shear  connector with various height and thickness, and mounted on  various thickness of bed plate are studied here by u sing the  direct pull- out test (see Fig.5 ) and a formula for the  calculation of this capacity is proposed in the present thesis .  The outcome is compared with the direct push- out test outcome as  found by Slutter & Driscoll [ 3 ) and Kiyomiya & Yokota [4) . How  the various sizes, shapes and arrangement of s h ear connectors may  affect the joint behavior of the composite lapped splice is also  presented here from two composite lapped splice beam tests in  this study (see Fig.7 ) and some test results from Virach [10) .  Some direct pull- out tests with the confinement of stirrups or  deformed bars piercing through the shear connector (see Fig.6)  are also conducted to clarify their improvement in mechanical  behavior of shear connector
UR  - http://203.159.5.9/ait-thesis/detail.php?q=B18633
ER  -