01708nam a2200253   450000500170000000800410001703500150005810000230007324500580009626000520015430000110020649000230021750001620024050200580040252005990046065000400105965000310109970000350113070000430116570000460120871000800125481000550133485600650138920260818114604.0250398         th                  eng    a.b102973400 aPinit Tungboonterm10aFull scale load tests on single piles and pile groups  aBangkok :bAsian Institute of Technology,c1978  a225 p.1 aThesis ;vno. 1289  aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering of the Asian Institute of Technology, Bangkok, Thailand  aThesis (M.Eng.) - Asian Institute of Technology, 1978  aVertical and horizontal load tests were carried out on both individual piles and on pile groups. The test results showed that the vertical bearing  capacity of the wooden pile group was less than what would be expected from the load test on a single wooden pile, whereas the concrete pile group had a bearing capacity slightly higher than the sum of the individual bearing capacity of the piles in the group. The horizontal load tests showed that the ultimate horizontal load for the pile groups was approximately equal to the sum of the bearing capacity of the individual piles in the groups.  0aPiling (Civil engineering)xTesting 0aMaterialsxDynamic testing1 aHolmberg, Soren, eChairperson1 aBrenner, R.P., eExamination Committee1 aAkagi, Toshinobu, eExamination Committee2 aThe Provincial Government of British  Columbia, Canada, eScholarship Donor2 aAsian Institute of Technology.tThesis ;vno. 1289  3Full-Textuhttp://203.159.5.9/ait-thesis/detail.php?q=B22895