<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Inverse analysis of settlement data on improved soft clays by test embankments and laboratory model test</title>
  </titleInfo>
  <name type="personal">
    <namePart>Enriquez, Apollo Seno</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Bergado, Dennes T.</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Indraratna, Buddhima</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>S. Sambhandharaksa</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>Government of Denmark</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1989</dateIssued>
    <issuance>monographic</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>106 p.</extent>
  </physicalDescription>
  <abstract>In this study , deformation and flow parameters were  determined by inverse analyses using two tes·t embankments  improved with prefabricated vertical drains and granular  piles. Asaoka{u2022}s method based from Barron's Theory was used  with some modifications from Hansbo ' s Theory to take into  account of the effect of smear in the case of embankment on  vertical drains. The back- analyzed parameters (Eu , Ch and  Cv ) were used to predict the amount and rate of settlements.  Excellent agreements were obtained in the case of One Dimensional (Oedometer ) , Skempton- Bjerrum and Asaoka ' s  methods . One-Dimensional method with inclusion of initial  settlement over estimate the predictions. For the embankment  on granular piles, inverse analysis was carried out in two  stages. Good agreements were obtained on the predicted  amount and rate of settl~ments by Asaoka and Balaam ' s  methods on the final stage loading al though both slightly  overpredicted at the initial stage loading. The equilibrium  method always over estimate the predictions. Inverse  analyzed Ch r1e 1d / Ch 1ab is about 1.5 to 4.0, Cvr1e1d/Cv1ab is  between 1. 3 to 12 and Eu /Su is 150 . ·The back-analyzed C11  value is about 4.90 t / m2 {u2022} Consolidation tests and fi e ld vane  tests showed an improvement in shear strength and analysis  using three different methods of stress distributions showed  that the embankment on vertical drains is now normally  consolidated and is undergoing secondary compression while  the embankment on granular piles is still undergoing primary  consolidation and is about to be normally consolidated. The  preconsolidation pressures obtained from EOP-24hr  consolidation tests are 5% to 10% higher than those obtained  from conventional tests . Very high preconsolidation  pressures are obtained from EOP Loading tests which can be  finished in 15 to 180 minutes. Laboratory model test on clay  sample improved with granular piles showed a decrease in n  value with the increase in loading magnitudes. The  settlements in slow tests indicate that the reduction in  settlements are reduced by about 30% as compared with that  of quick tests. Greater settlement reduction is obtained for  higher area ratio and using gravels as granular pile  materials.</abstract>
  <note>A thesis submitted in partial fulfillment of the  requirements for the degree in Master of Engineering, School of Engineering and Technology</note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1989</note>
  <subject authority="lcsh">
    <topic>Embankments</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. GT-88-09</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B18037</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B18037</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">261198</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260818144244.0</recordChangeDate>
  </recordInfo>
</mods>
