<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Application of pulsation cleaning technique in crossflow microfiltration</title>
  </titleInfo>
  <name type="personal">
    <namePart>Hsu, Wen-ae</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Kim Sun-Il</namePart>
    <role>
      <roleTerm type="text">Chairperson</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Harada, Hideki</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="personal">
    <namePart>Samorn Muttamara</namePart>
    <role>
      <roleTerm type="text">Examination Committee</roleTerm>
    </role>
  </name>
  <name type="corporate">
    <namePart>The Government of Republic of China</namePart>
    <role>
      <roleTerm type="text">Scholarship Donor</roleTerm>
    </role>
  </name>
  <typeOfResource>text</typeOfResource>
  <genre authority="marc">series</genre>
  <genre authority="marc">technical report</genre>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">th</placeTerm>
    </place>
    <place>
      <placeTerm type="text">Bangkok</placeTerm>
    </place>
    <publisher>Asian Institute of Technology</publisher>
    <dateIssued>1991</dateIssued>
    <issuance>continuing</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>88 p.</extent>
  </physicalDescription>
  <abstract>Crossflow microfiltration is a pressure driven membrane  process allowing better permeate flux by shearing action of flow. It can remove most of the impurities found in water and  wastewater. But there are still main problems to be solved due  to fouling, deposition and internal clogging, which reduce the efficiency of separation. Pulsation cleaning is one of the  desirable techniques to avoid or minimize these drawbacks.  In this laboratory-scale study, different sets of CFMF  experiments were carried out to study the use of pulsation  cleaning technique as a declogging technique in enhancing the  process performance. Synthetic clay suspension and the filter  backwash water were used out. Pulsation cleaning technique was  found to improve the efficiency of the filtration process, when  synth etic clay suspension and the filter backwash water were  used. The effect of pulsation frequency, Tf, and break duration, Tb, were studied and it was observed that the condition of Tf= 1  min., Tb = 5 sec. was found to be the best operating condition for  both suspensions.  It was found that the higher permeate flux was obtained when  the operation of pulsation was more frequent. Also the study  performed showed that this technique improved the permeate flux  by 89% and 88%, respectively. </abstract>
  <note>A thesis submitted in partial fulfillment of the requirements for  the degree o f Master of Engineering, School of Environment, Resources and Development</note>
  <note>Thesis (M.Eng.) - Asian Institute of Technology, 1991</note>
  <subject authority="lcsh">
    <topic>Sewage</topic>
    <topic>Purification</topic>
    <topic>Filtration</topic>
  </subject>
  <relatedItem type="series">
    <titleInfo>
      <title>Thesis ; no. EV-91-25</title>
    </titleInfo>
    <name type="corporate">
      <namePart>Asian Institute of Technology.</namePart>
      <namePart/>
    </name>
  </relatedItem>
  <identifier type="uri">http://203.159.5.9/ait-thesis/detail.php?q=B17416</identifier>
  <location>
    <url displayLabel="Full-Text">http://203.159.5.9/ait-thesis/detail.php?q=B17416</url>
  </location>
  <recordInfo>
    <recordCreationDate encoding="marc">170399</recordCreationDate>
    <recordChangeDate encoding="iso8601">20260817162931.0</recordChangeDate>
  </recordInfo>
</mods>
