Poonsak Sriudorn creator Kunnawee Kanitpong Chairperson Kim, Hyunmyung Examination committee Auckpath Sawangsuriya Examination committee RTG Fellowship Scholarship donor text series technical report th Pathum Thani, Thailand Asian Institute of Technology 2009 continuing eng 67 leaves : ill. + 1 online resource Currently, the cost of asphalt binder which is made from crude oil is highly increase and affects to the road construction costs. Using Reclaimed Asphalt Pavement (RAP) is a way to reduce construction costs. It is not only re-using old materials but it is a way to reduce waste as well. In this study, asphalt mixes consisting of 0, 10, 20, 30, and 40% RAP would be evaluated by using the Superpave design method. All materials would be taken from local sources in Thailand. Moisture sensitivity, resilient modulus, and densification energy indices of each mixture were evaluated. The results showed that mixture with 10% RAP was an optimum mixture to use as an asphalt concrete because their properties met the Superpave{u2019} specification. Higher percentage of RAP caused higher indirect tension and resilient modulus. The inclusion of RAP into the mixtures in this study did not significantly influence the mixtures{u2019} densification energy indices. In terms of construction cost, 3.5, 7.03, 10.28 and 13.52 percent per kilometer were the reduced percentage of cost of mixture with 0, 10, 20, 30 and 40% respectively. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering in Transportation Engineering, School of Engineering and Technology Thesis (M.Eng.) - Asian Institute of Technology, 2009 Pavements, Asphalt concrete Asian Institute of Technology. http://203.159.5.9/ait-thesis/detail.php?q=B04099 http://203.159.5.9/ait-thesis/detail.php?q=B04099 110113 20260818145029.0