A Fuh, Hwan-ran creator Vilas Wuwongse Chairperson Radok, J.R.M Examination Committee Kanchit Malaivongs Examination Committee The Government of Republic of China Scholarship Donor text th Bangkok Asian Institute of Technology 1984 monographic eng

print

80 p. The objective of this study is to develop a microcomputer-based computer- aided-design (CAD) system for single-input-single-output (SISO) control systems, using the classical control design approach. The major problem in the classical approach is the difficulty to design lag-lead compensators and to adjust parameters in PID controllers. This CAD system is developed to facilitate this difficulty. Using the CAD system, the designer has only to compare response curves of two different designs at a time without any need to directly specify control parameters. The optimal control · parameters are selected by interactive optimization techniques which are based on the modified Fibonacci and Complex methods. The proposed CAD system is implemented on a 16-bit microcomputer and applied to three design examples. The results show that the designs obtained by using the CAD system are superior to the ones obtained by the conventional classical control design approach. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology Thesis (M. Eng.) - Asian Institute of Technology, 1984 Microcomputers Control theory Computer programs Asian Institute of Technology. http://203.159.5.9/ait-thesis/detail.php?q=B20821 http://203.159.5.9/ait-thesis/detail.php?q=B20821 270898 20260818155120.0