TY  - BOOK
AU  - Fuh,Hwan-ran
AU  - Vilas Wuwongse, 
AU  - Radok,J.R.M
AU  - Kanchit Malaivongs, 
ED  - The Government of Republic of China, 
TI  - A microcomputer-based CAD for control systems
T2  - Thesis
PY  - 1984///
CY  - Bangkok
PB  - Asian Institute of Technology
KW  - Microcomputers
KW  - Control theory
KW  - Computer programs
N1  - A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology; Thesis (M. Eng.) - Asian Institute of Technology, 1984
N2  - The objective of this study is to develop a  microcomputer-based computer- aided-design (CAD) system for  single-input-single-output (SISO) control systems, using the  classical control design approach.  The major problem in the classical approach is the  difficulty to design lag-lead compensators and to adjust  parameters in PID controllers. This CAD system is developed  to facilitate this difficulty. Using the CAD system, the  designer has only to compare response curves of two  different designs at a time without any need to directly  specify control parameters. The optimal control · parameters  are selected by interactive optimization techniques which  are based on the modified Fibonacci and Complex methods.  The proposed CAD system is implemented on a 16-bit  microcomputer and applied to three design examples. The  results show that the designs obtained by using the CAD  system are superior to the ones obtained by the conventional  classical control design approach
UR  - http://203.159.5.9/ait-thesis/detail.php?q=B20821
ER  -