01987nam a2200265   450000500170000000800410001703500150005810000200007324501000009326000520019330000160024549000270026150001400028850200580042852007610048665000640124765000430131170000390135470000450139370000390143870000520147771000680152981000590159785600650165620260818171841.0130598         th                  eng    a.b1050090x1 aHsing, Yun-haun10aPhysical model investigation of flow pattern induced by cooling water discharging in an estuary  aBangkok :bAsian Institute of Technology,c1980  axii, 111 p.1 aThesis ;vno. WA-79-25  aA thesis submitted in partial fulfilment of requirements for  the degree of Master of Engineering, School of Engineering and Technology  aThesis (M.Eng.) - Asian Institute of Technology, 1980  aThe Bang Pakong Power Plant is a fossil fueled generating station  located on the left bank of Bang Pakong River. It employs a once-through cooling system.  The objective of this study is to investigate the flow patterns induced by the outlet of the cooling water system under the effects of the varying tides. The most severe condition for the condenser discharges is  considered under the full loading operation, i.e. Unit 1, 2, 3 and 4 in operation. A hydraulic scale model for the interested zone was constructed. Tests were carried out under the selected criteria of ambient tides.  Based on the results of the experiments, the knowledges of flow patterns and velocity distributions in the vicinity of the power plant can be used for the design basis. 0aThermal pollution of rivers, lakes, etc.xBang Pakong River 0aHydraulicsxTables, calculations, etc.1 aOverbeek, Henk Jen, eChairperson 0 aPrida Thimakorn, eExamination Committee1 aLe Huu Ti, eExamination Committee0 aTawatchai Tingsanchali, eExamination Committee2 aGovernment of Republic of China (R.S.E.A.), eScholarship Donor2 aAsian Institute of Technology.tThesis ;vno. WA-79-25  3Full-Textuhttp://203.159.5.9/ait-thesis/detail.php?q=B22171