| 000 | 02902nam a2200397 4500 | ||
|---|---|---|---|
| 005 | 20260819084419.0 | ||
| 008 | 060898 th eng | ||
| 035 | _a.b10726676 | ||
| 099 | 9 | _aAIT Thesis no. ST-81-19 | |
| 100 | 0 | _aVanchai Meteveravong | |
| 245 | 1 | 0 | _aTheoretical and experimental evaluation of prefabricated floor systems in Thailand |
| 260 |
_aBangkok : _bAsian Institute of Technology, _c1981 |
||
| 300 | _avii, 85 p. | ||
| 490 | 1 |
_aThesis ; _vno. ST-81-19 |
|
| 500 | _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology | ||
| 502 | _aThesis (M.Eng.) - Asian Institute of Technology, 1981 | ||
| 520 | _aThe aim of this research work was to evaluate the performance of different types of prefabricated floor systems commonly used in Thailand. The specimens used were precast channel, single-tee and precast-prestressed hollow-core slabs. The testing methods were in accordance with ASTM Designation E72. The specimens were tested for both simple and two-span supports with cast-in-situ reinforced concrete topping in order to investigate the effect of continuity at the support. The loads and deflections based on theoretical analysis were determined and compared with experimental results. Test results revealed that the safety factor for the composite slabs, based on the maximum permissible computed deflection specified by ACI 318-77, ranged from 2.0 to 5.3. For slabs having low load carrying capacity, the topping could significantly increase the overall load carrying capacity of the slab when the effect of continuity was taken into account. On the other hand, for stronger sections e.g. the precast hollow-core slab the overall load carrying capacity of the section, taking into account the effect of continuity, was not influenced by the effect of topping. | ||
| 650 | 1 | 0 | _aPrecast concrete construction |
| 650 | 1 | 0 | _aFloors, Concrete |
| 700 | 0 |
_aPichai Nimityongskul, _eChairperson |
|
| 700 | 1 |
_aKarasudhi, Pisidhi, _eExamination Committee |
|
| 700 | 1 |
_aOgawa, Junji, _eExamination Committee |
|
| 710 | 2 |
_aGovernment of Netherland, _eScholarship Donor |
|
| 810 | 2 |
_aAsian Institute of Technology. _tThesis ; _vno. ST-81-19 |
|
| 856 |
_3Full-Text _uhttp://203.159.5.9/ait-thesis/detail.php?q=B21764 |
||
| 907 |
_a.b10726676 _bmnait _cs |
||
| 902 | _a250108 | ||
| 998 |
_b2 _c951012 _dm _ea _fs _g0 |
||
| 945 | _lmnait | ||
| 945 | _lmnarc | ||
| 942 | _c22 | ||
| 942 | _c40 | ||
| 909 |
_aBarcode : 30050120689467 _bCREATED : 2014-04-29 _cRECORD # : i12793449 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 909 |
_aBarcode : 30050160013610 _bCREATED : 2016-04-04 _cRECORD # : i1292281x _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 999 |
_c120094 _d120094 |
||