| 000 | 03276nam a2200445 4500 | ||
|---|---|---|---|
| 005 | 20260817172309.0 | ||
| 008 | 251197 th eng | ||
| 035 | _a.b10130627 | ||
| 099 | 9 | _aAIT Thesis no. 260 | |
| 100 | 0 | _aVera Suwanakul | |
| 245 | 1 | 0 | _aCast in-situ piles in Bangkok clay |
| 260 |
_aBangkok : _bAsian Institute of Technology, _c1969 |
||
| 300 | _a100 p. | ||
| 490 | 1 |
_aThesis ; _vno. 260 |
|
| 500 | _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering of Asian Institute of Technology, Bangkok, Thailand | ||
| 502 | _aThesis (M.Eng.) - Asian Institute of Technology, 1969 | ||
| 520 | _aFive cast in-situ Vibro piles were cast for the testing purpose with the load cells placed at the pile tip. They were 17, 20, 23 and 24 meters long, all piles have the same diameter of 52 cm. The cyclic pile loading tests were carried out after 28 and 66 days of pile casting. The 2 and % hour loading intervals were performed to every test pile. All piles failed at the settlement between 0.45 to 0.72 inch. There is no significant change of failure load with respect to the loading interval used. The shaft friction and the end bearing capacity of the pile were determined by load cells and by the graphical method proposed by JAIN and KUMAR, The result obtained from the graphical method was between 23 to 225 and 3 to 10 percent different from the load cell method for end bearing and shaft friction respectively. The adhesion constant (a) and the end bearing capacity factor (N) were computed from the results of the two methods. They were 0.49 to 0.89 and 3.94 to 14.22 based on the shearing strength obtained by vane shear and or standard penetration tests. For the results based on unconfined compression tests they were 1.03 to 1.37 and 4.69 to 15.50 respectively. | ||
| 650 | 0 | _aPiling (Civil Engineering) | |
| 650 | 0 |
_aClay _xThailand _xBangkok |
|
| 700 | 0 |
_a Chai Muktabhant, _eChairperson |
|
| 700 | 1 |
_aBrand, E.W., _eExamination Committee |
|
| 700 | 1 |
_aNelson, John D., _eExamination Committee |
|
| 710 | 2 |
_aAsian Institute of Technology, _eScholarship Donor |
|
| 810 | 2 |
_aAsian Institute of Technology. _tThesis ; _vno. 260 |
|
| 856 |
_3Full-Text _uhttp://203.159.5.9/ait-thesis/detail.php?q=B24674 |
||
| 907 |
_a.b10130627 _bmnait _cv |
||
| 902 | _a260703 | ||
| 998 |
_b3 _c951012 _dm _ea _fv _g0 |
||
| 945 | _lmnait | ||
| 945 | _lmnait | ||
| 945 | _lmnarc | ||
| 945 | _lmnarc | ||
| 942 | _c20 | ||
| 942 | _c40 | ||
| 909 |
_aBarcode : 30050003094439 _bCREATED : 1994-05-16 _cRECORD # : i10147718 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 909 |
_aBarcode : 30050003094454 _bCREATED : 1994-05-16 _cRECORD # : i1014772x _dLPATRON : 1014538 _eLCHKIN : 2016-12-13 _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 1 _jTOT RENEW : 0 |
||
| 909 |
_aBarcode : 30050003094447 _bCREATED : 1994-05-16 _cRECORD # : i10147731 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 909 |
_aBarcode : 30050160112123 _bCREATED : 2016-08-04 _cRECORD # : i12931135 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 999 |
_c15549 _d15549 |
||