000 04175nas|a2200505 a 4500
005 20260817172510.0
008 100811s2007 th uu|m rtt 0| a1eng d
035 _a.b12081462
099 9 _aAIT Thesis no.PP-07-4
100 1 _aYang, Xuelian
245 1 0 _aCharacteristics of frayed fiber and its role as a reinforcement pulp
260 _aPathum Thani, Thailand :
_bAsian Institute of Technology,
_c2007
300 _a39 leaves :
_bill.
490 1 _aThesis ;
_vno. PP-07-4
500 _aA thesis submitted in partial fulfillment of the requirements for the Degree of Master of Engineering in Pulp and Paper Technology
502 _aThesis (M.Eng.) - Asian Institute of Technology, 2007
520 _aThis thesis is based on the study of frayed fiber. A softwood pulp (mixture of hemlock and pine) was refined in the range of 200-450 kWh/t using specific edge load of 3w.s/m. The pulp then was examined visually for frayed fiber using magnifying microscope. The population of frayed fiber was increased with the increase of refining energy, although the population of the frayed fiber was much less than expected due to the shorter fiber length and smaller coarseness of the unrefined pulp (i.e., the original pulp). The resolution of the microscope was very low, so the details of the frayed fiber was not observed, however, fibers by similar characteristics of frayed fibers was visible with the microscope or naked eye as compared with the control fibers. The refined pulp was examined for pulp characteristics and papermaking quality. Fiber length and fiber coarseness were reduced, but the fines percentage of the pulps were increased. All strength and optical properties were increased except zero-span tensile strength. R30 fraction of the most refined pulp (i.e., pulp refined to 450kWh/t) was assumed to represent frayed fiber. Different percentage of the frayed fiber was mixed with Eucalyptus pulp refined in PFI mill to 4000 revs. The result compared with the pulp refined to 300 kWh/t using Escher Wyss. It was concluded that the papermaking quality of the fine paper made using frayed fiber well competes with the whole refined pulp (i.e., pulp refined to 300kWh/t). Frayed fiber as a reinforced pulp also shows better drainage, air permeability and bulk, which are critical factors in many papermaking applications.
650 0 _aWood-pulp
_xRefining
700 1 _aNazhad, Mousa M.,
_eChairperson
700 1 _aLehtinen, Esa,
_eExamination Committee
700 1 _aMalinen, Raimo O.,
_eExamination Committee
710 2 _aFinland,
_eScholarship Donor
710 2 _aAIT Fellowship,
_eScholarship Donor
810 2 _aAsian Institute of Technology.
_tThesis ;
_vno. PP-07-4
856 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B11287
907 _a.b12081462
_bmnait
_cu
902 _a240329
998 _b0
_c100811
_dm
_ea
_fu
_g0
945 _lmnait
945 _lmnait
945 _lmnait
945 _lmnait
945 _lmnait
945 _lmnarc
942 _c20
942 _c22
942 _c40
909 _aBarcode : 30050120932735
_bCREATED : 2010-11-08
_cRECORD # : i12641820
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050120651673
_bCREATED : 2014-05-20
_cRECORD # : i12801173
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050160026430
_bCREATED : 2016-03-18
_cRECORD # : i12897310
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050121018781
_bCREATED : 2020-08-29
_cRECORD # : i13292018
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050121018799
_bCREATED : 2020-08-29
_cRECORD # : i1329202x
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050121018807
_bCREATED : 2020-08-29
_cRECORD # : i13292031
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c16347
_d16347