000			03759nam a2200409 4500
005			20260817161600.0
008			th eng
035			_a.b11686753
099		9	_aAIT Thesis no. EV-97-05
100	0		_aNyein Nyein Aung
245	1	0	_aAdsorption/desorption of heavy metals using chitosan
260			_aBangkok : _bAsian Institute of Technology, _c1997
300			_a78 leaves
490	1		_aThesis ; _vno. EV-97-05
500			_aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Science, School of Environment, Resources and Development
502			_aThesis (M.Sc.) - Asian Institute of Technology, 1997
520			_aBatch experiments for heavy metal removal by adsorption using chitosan and desorption of adsorbed metal from chitosan were conducted. Adsorption and desorption isothermal results indicated that multilayer adsorption of heavy metal on chitosan took place. Both adsorption and desorption for copper and chromium are favorable whereas those of lead are also acceptable. 66%,45%and 47% desorption was observed for copper, chromium and lead. Kinetic studies verified that desorption occured within 24 hour. Effects of influencing parameters such as pH, particle size, temperature, agitation speed were investigated. The optimum pH values for adsorption on chitosan were 5.5,6 and 4, likewise, the optimum pH values for desorption were 2.41, 2.5 and 2.5 for Cu Cr and Pb respectively. The amount of Cu sorbed on 710 æm chitosan particles and 425 æm chitosan particles were 2 mg/g and 7 mW/g for the equilibrium concentration of 1 mg/L. The amount of Cu sorbed at 37.5 ° C and 50 C were 6.5 mg/g and 11 mg/g respectively for the equilibrium concentration of 0.5 mg/L. The amount of Cu sorbed at the agitation speed of 50 rpm and 250 rpm were 16 mg/g and 17 mg/g for the equilibrium concentration of 5 mg/L. In the case of desorption, when the initial Cu sorbed was 2.5 mg/g, Cu desorbed from 710 æm chitosan particles and 425 æm chitosan particles were 1.05 mg/g and 1.19 mg/g respectively. When the initial amount sorbed was 5 mg/g, Cu desorbed at 37.5 ° C and 50 °c were 3.5 mg/g and 4.5 mg/g. When the initial Cu sorbed was 17 mg/g, the amount of Cu desorbed at the agitation speed of 50 rpm and 250 rpm were 1.9 mg/g and 10 mg/g respectively. Similar trend was observed for Cr and Pb. Lower particle size, higher temperature and higher agitation speed enhanced both adsorption and desorption.
650	1	0	_aSewage _xPurification _xHeavy metals removal
700	1		_aAnnachhatre, Ajit P., _eChairperson
700	1		_aSuwalee Chandrkrachang, _eExamination Committee
700	1		_aIshibashi, Y., _eExamination Committee
710	2		_aAsian Institute of Technology Partial, _eScholarship Donor
810	2		_aAsian Institute of Technology. _tThesis ; _vno. EV-97-05
856			_3Full-Text _uhttp://203.159.5.9/ait-thesis/detail.php?q=B14317
907			_a.b11686753 _bmnait _cy
902			_a240403
998			_b0 _c971208 _dm _ea _fy _g0
945			_lmnait
945			_lmnait
945			_lmnarc
942			_c20
942			_c40
909			_aBarcode : 30050120600738 _bCREATED : 1996-11-07 _cRECORD # : i12036006 _dLPATRON : 1019654 _eLCHKIN : 2007-05-25 _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 3 _jTOT RENEW : 0
909			_aBarcode : 30050120600720 _bCREATED : 1996-11-07 _cRECORD # : i12036018 _dLPATRON : 1019762 _eLCHKIN : 2007-11-10 _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 26 _jTOT RENEW : 8
909			_aBarcode : 30050160078555 _bCREATED : 2016-05-23 _cRECORD # : i1298629x _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
999			_c1819 _d1819