000 03310cas a2200421 a 4500
005 20260817173320.0
008 110920s1989 th uu|m rtt 0| a1eng d
035 _a.b10150651
099 9 _aAIT Thesis no. AE-89-26
100 1 _aSahu, Mahesh Kumar
245 1 0 _aComparative analysis of condition and convection drying of paddy in a rotary dryer
260 _aBangkok :
_bAsian Institute of Technology,
_c1989
300 _a68 p.
490 1 _aThesis ;
_vno. AE-89-26
500 _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Environment, Resources and Development
502 _aThesis (M.Eng.) - Asian Institute of Technology, 1989
520 _aThe performance of an axial flight prototype rotary dryer using heated air for driving paddy was investigated. Drying air temperature in the range of 60 to 100 ·c was used for paddy having initial moisture content in the range of 18 to 24% w. b. A two stage paddy drying operation was found suitable to minimise the reduction in head yield with provision of tempering inbetween the drying stages. Paddy could be dried to about 14% w.b . and. the driving characteristics could be well represented by simple logarithmic model. For comparison paddy was dried using conduction heating . Also a combination drying consisting of first stage conduction heating and second stage heated air drying was tried. The moisture canoe used was same in all the systems but the temperature used was different in conduction heating depending on the optimum conditions found from the earlier studies on conduction drying to paddy. The milling quality was found to be same in all the systems. The drying efficiency was higher in heated air drying than in conduction heating. The energy efficiency was almost same in all the systems . Cost comparison showed t h at conduction drying incurred minimum operating cost per ton of paddy followed by combination drying. Heated air drying incurred maximum cost.
650 0 _aRice
_xDrying
700 1 _aIllangantileke, Sarath G.,
_eChairperson
700 0 _aAthapol Noomhorm,
_eExamination Committee
700 1 _aJindal, Vinod Kumar,
_eExamination Committee
700 1 _aWaibel, Hermann,
_eExamination Committee
710 2 _aRoyal Government of The Netherlands.,
_eScholarship Donor
810 2 _aAsian Institute of Technology.
_tThesis ;
_vno. AE-89-26
856 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B17874
907 _a.b10150651
_bmnait
_cs
902 _a240411
998 _b2
_c951012
_dm
_ea
_fs
_g0
945 _lmnait
945 _lmnait
945 _lmnarc
942 _c20
942 _c40
909 _aBarcode : 30050002954534
_bCREATED : 1994-05-16
_cRECORD # : i10177127
_dLPATRON : 1019403
_eLCHKIN : 2007-04-16
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 5
_jTOT RENEW : 2
909 _aBarcode : 30050003004172
_bCREATED : 1994-05-16
_cRECORD # : i10177139
_dLPATRON : 1019403
_eLCHKIN : 2007-02-27
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 15
_jTOT RENEW : 9
909 _aBarcode : 30050120364145
_bCREATED : 2016-05-27
_cRECORD # : i12998023
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c19549
_d19549