000 09090nas a2200409 a 4500
005 20260818084435.0
008 230724s2020 th uu m rtt 0| a1eng d
035 _a.b12409121
099 9 _aAIT Diss no.GE-22-01
100 0 _aChaiyaphruk Chaiyasart
245 1 0 _aComprehensive characterization of fractured igneous rock reservoirs and PS modeling with reference to hydrocarbon E&P in Wichian Buri Subbasin, Thailand
260 _aPathum Thani, Thailand :
_bAsian Institute of Technology,
_c2023
300 _a101 leaves :
_bill.
490 1 _aDissertation ;
_vno. GE-22-01
500 _aA Dissertation Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy in Geotechnical and Earth Resources Engineering with area of specialization in Geosystem Exploration and Petroleum Geoengineering
502 _aThesis (Ph.D.) - Asian Institute of Technology, 2023
520 _aThe hydrocarbon in shallow fractured igneous rock reservoirs is a rare type of petroleum system found in several countries, including Thailand. The Wichian Buri basin is in the Phetchabun province of central Thailand. The Wichian Buri (WB) sub-basin has been producing hydrocarbons since 1988 in clastic and 2006 in fractured reservoirs. The igneous intrusions of 11-16 Ma and 18-24 Ma could play a dual function in the petroleum system in this area. Understanding how the intruded shale maturity was enhanced, how the fractured igneous rock reservoir was formed by the intrusion process, how the HC was generated and migrated into it are all important aspects of this petroleum system. The goal of this research is to characterize the fractured igneous rock reservoir in the WB sub-basin using well log analysis, onedimensional petroleum system (1DPSM), reserve estimation, reservoir simulation modeling, and economic feasibility for exploration and production. The dissertation begins with literature review to better understand the regional geological conditions and those in the WB sub-basin. The first step of this study is to conduct an integrated geological evaluation of the igneous rock reservoir found in this basin. A field outcrop survey was conducted to collect rock samples and well cuttings for laboratory thin section analysis, determination of physical characteristics, and seismic data correlation. The outputs of the well log analysis included lithology identification, TOC, source rock thickness, petrophysical parameters for basin modeling, and volumetric calculation using Monte Carlo simulation. The quality of the seismic data was checked, and seismic interpretation of the source rock and igneous rock layers was also done for further one-dimensional petroleum system modeling (1DPSM) and volumetric calculations. Monte Carlo simulation was used to assess the stock of oil in situ (STOIP). To calculate the estimated ultimate recovery (EUR), a pressure plot was made for identification of the oil-water-contact (OWC) and a production decrease analysis with water breakthrough was carried out. The static reservoir model was constructed, and various dynamic reservoir models were running with historical matching with the actual production data. The final step was to examine Thailand's fiscal framework, define the cost unit and crude oil price, and then assess the SW1 concessionaire's economic viability. A comprehensive well log analysis was conducted to find out the petrophysical characteristics of the fractured igneous rock reservoirs, which are generally characterized by low GR of 20 {u2013} 38 API, RHOB of 2.64 - 2.69 g/cc and DT of 61-68 os/ft. It is noted that the average porosity for fractured intrusive rocks located from 750 to 1,500 m is about 9% {u2013} 11%, for the shallow extrusive igneous rock reservoirs located around 300 m deep it is about 21.30% {u2013} 22.70%, while for deeper-located pre-Tertiary basalt reservoirs from 1500 to 1800 m deep is about 17.48%. Water saturation of these fractured reservoirs was calculated by Archie{u2019}s. Simandoux, Dual porosity, Waxman-Smits, and Indonesia models, respectively, varying from 51 to 97%. The source rock TOC was determined using well log analysis and the {uF044}logR technique, with the shale zone baseline interval found at 1,038{u2013}1,080 m, corresponding to Etbase =125 s/ft and Rbase = 4 ohm.m. The average TOC of the source rock from 1,332 to 1,500 m MDRKB was 1.84 wt%. The source rock's net to gross ratio is 10.71%, corresponding to a net thickness of 36.95 m. The rifting process formed the Wichian Buri sub-basin in the Early Oligocene and ended in the Middle Miocene when the post rift began. The 1DPSM temperature gradient is 2.5-5.5 Co/100 m. The source rock's vitrinite reflectance is 0.62 percent. The source rock's hydrogen index (HI) is 222 mgHC/gTOC, while the original hydrogen index (HI0) is 550-600 mgHC/gTOC. Based on 1DPSM results, the hydrocarbons generated, expulsed, and retained range from 2,179.1 to 3,178.6 MMSTB, 298.3 to 355.5 MMSTB, and 1,880.8 to 2,823.0 MMSTB. The percentage of HCexp to HGgen is 11.2% to 13.7% and that of HCret to HGgen is 86.3% to 88.8% for the source rock in the Wichian Buri sub-basin. The calculated HCexp, was corrected by multiplying it with an efficiency coefficient of petroleum system (PSeff), which for HI0 = 600 mgHC/gTOC, PSeff = 15% and N/G of source rock 10.71% was assessed as 53.33 MMSTB. This is supposed to be a conservative assessment, as if one uses higher HI0 and PSeff the remained HCIIP in the shallow fractured igneous rock reservoirs in the Wichian Buri sub-basin can be higher. All in all the findings by an integrated well log analysis and 1DPSM in this study helped to indicate that there is still a significant amount of HCIIP to be explored in future in this sub-basin with such special type of shallow fractured igneous intrusion reservoirs. The EUR was calculated using two different methods for one fractured reservoir named WBEXT-3, and namely: (i) production decline analysis and (ii) volumetric calculation using Monte Carlo simulation. It was found that by considering water breakthrough in the production decline analysis one could get a more realistic production projection for shallow fractured igneous rock reservoirs in the WB sub-basin. Regarding the reserve of fractured igneous rock reservoir, the cumulative oil (Np) until end of April 2017 is 4.165 MMSTB. The 1P STOIP was calculated using the production decline method, while the 2P and 3P STOIP were calculated using the volumetric calculation by Monte Carlo simulation. The 1P reserve is as small as 304 MSTB, while the 2P and 3P reserves, on the other hand, are much higher and equal to 4,204.73 and 5,585.4 MSTB respectively. In the field development plan, new wells were planned considering water flooding. The static reservoir models were successfully constructed for dynamic reservoir simulations. The total capital expenditure (CAPEX) was estimated MM$ 21.02 from new prospects and in-filled drilling around $MM 1.54 per well including well facilities & installation. The cost of waterflooding project was estimated MM$ 2.9, consisting of three major cost components, i.e.: i) study cost (MM$ 0.45); ii) well completion and onshore equipment (MM$ 2.0); iii) for well intervention, perforation, and sand screen installation (MM$ 0.45). The decommissioning cost plans for removing all surface equipment and well abandon around $MM 0.204 at the year-end period of SW1 concession. The average historical crude oil selling of SW1 block with API range from 22 to 35 without sulfur in WB field was different from WTI crude oil price market around 7.77 USD/STB relatively. The operation expenditure (OPEX) of crude oil trucking, variable cost, fixed cost, and G&A cost was estimated equal 7.04 $US/STB from actual cost over production of 2015 data. The results of economic model analysis are good for future field development of SW1 concession with the 3-5% discounted net cash flow $MM 17.63 - 21.09, $MM.
650 0 _aIgneous rocks
_zThailand
_zWichian Buri
650 0 _aHydrocarbon reservoirs
_zThailand
_zWichian Buri
700 1 _aPham, Huy Giao,
_eChairperson
700 0 _aAvirut Puttiwongrak,
_eCo-Chairperson
700 1 _aChau, Kuo-Chieh,
_eExamination committee
700 0 _aNoppadol Phien-Wej,
_eExamination Committee
710 2 _aRoyal Thai Government Fellowship,
_eScholarship donor
810 2 _aAsian Institute of Technology.
_tDissertation;
_vno. GE-22-01
856 4 0 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B19484
907 _a.b12409121
_bmnait
_cm
902 _a250411
998 _b0
_c230724
_dm
_ea
_fm
_g0
945 _lmnarc
945 _lmnarc
942 _c40
942 _c61
909 _aBarcode : 30050121040454
_bCREATED : 2023-07-21
_cRECORD # : i13456799
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : -
_bCREATED : 2023-07-21
_cRECORD # : i13456805
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c20488
_d20488