| 000 | 03028nam a2200397 4500 | ||
|---|---|---|---|
| 005 | 20260818134019.0 | ||
| 008 | 070198 th eng | ||
| 035 | _a.b10342011 | ||
| 099 | 9 | _aAIT Thesis no. 739 | |
| 100 | 1 | _aHabibullah, S. A. M. | |
| 245 | 1 | 0 | _aHydraulic model for steady non-uniform flow in straight channel |
| 260 |
_aBangkok : _bAsian Institute of Technology, _c1975 |
||
| 300 | _a84 p. | ||
| 490 | 1 |
_aThesis ; _vno. 739 |
|
| 500 | _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering of the Asian Institute of Technology, Bangkok, Thailand. | ||
| 502 | _aThesis (M.Eng.) - Asian Institute of Technology, 1975 | ||
| 520 | _aA theoretical study of hydraulic model for steady non-uniform flow was carried out in this research. The study was restricted to straight channel only of rectangular and trapezoidal or nearly trapezoidal cross-section. The study revealed that un-distorted scale (br dr ) model for non-uniform flow at a design discharge (Q) can be simulated the proto-type but with a distorted scale (b J d ) model the to results are erroneous. To overcome this unsafe situation situation two methods have been suggested; use a model with composite roughness (n ,nb ), or adjust the results with correction factor. These s ,m ,m two methods are found to be valid also for the case of discharge (Qry other than design discharge (Q). The study also considered the case of uniform flow at other discharges and it was observed that with a distorted scale model, the same problem arises as in the case of non-uniform flow. This situation can also be improved with the above two methods. However, it was noticed that model for channel of exponential cross-section is not affected by the distortion of scale under any kind of flow, uniform or non-uniform, and at any discharges (Q or Q'). To varify the theoritical consideration many numerical examples have been considered and a limited laboratory experiment was carried out. | ||
| 650 | 0 | _aHydraulic models | |
| 650 | 0 | _aChannels (Hydraulic engineering) | |
| 700 | 1 |
_aKinori, Ben-Zion, _eChairperson |
|
| 700 | 1 |
_aIgai, Shi, _eExamination Committee |
|
| 700 | 1 |
_aAckermann, Norbert L., _eExamination Committee |
|
| 710 | 2 |
_aGovernment of British Columbia, _eScholarship Donor |
|
| 810 | 2 |
_aAsian Institute of Technology. _tThesis ; _vno. 739 |
|
| 856 |
_3Full-Tex _uhttp://203.159.5.9/ait-thesis/detail.php?q=B23993 |
||
| 907 |
_a.b10342011 _bmnait _cx |
||
| 902 | _a260427 | ||
| 998 |
_b1 _c951012 _dm _ea _fx _g0 |
||
| 945 | _lmnait | ||
| 945 | _lmnarc | ||
| 942 | _c20 | ||
| 942 | _c40 | ||
| 909 |
_aBarcode : 30050003034906 _bCREATED : 1996-06-06 _cRECORD # : i11774654 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 909 |
_aBarcode : 30050160092911 _bCREATED : 2016-04-22 _cRECORD # : i12948974 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0 |
||
| 999 |
_c56816 _d56816 |
||