000			04134nas|a2200421 i 4500
005			20260818143405.0
008			251198s1984 th uzm rtt 00| a1eng d
035			_a.b10363634
099		9	_aAIT RSPR no. ET-84-21
100	0		_aBubpha Thongphasuk
245	1	0	_aInsertion of alternative storage in a photovoltaic refrigerator
260			_aBangkok : _bAsian Institute of Technology, _c1984
300			_a54 p.
490			_aResearch Studies Project Report ; _vno. ET-84-21
500			_aA research study (6 credits) submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Environment, Resources and Development
502			_aResearch Studies Project Report (M. Eng.) - Asian Institute of Technology, 1984
520			_aIn photovoltaic refrigerator system due to load demand and power available are mismatch then battery is needed. The battery is expensive and cause some losses due to inefficient electrical-chemical conversation, which was about 80% each time when charged and discharged which bring about 60 to 70% overall. In this research, the battery which was chemical storage was tried to be substituted by latent heat storage. At temperature higher than its melting point, it will store cooling effect in sensible heat from and at temperature equals its melting point it will store the cooling effect in latent heat form which is very energetic. First, the system was introduced and the suitable latent storage material was recommended. There are many compounds which have m.p. in this cooling temperature range but the m.p. and high latent heat stored but these are not the two properties which should be considered, the others are vapor pressure, corrosion, poisonous, inflammable, reproducible, supercooling, volume change, thermal conductivity, abundant and cheap. Then comes the suitable materials for this range of application, the salt hydrates which satisfied these requirements. The minimum size of the PV array and battery capacity was determined and then simulated the system hourly by Prof. Exell's solar radiation simulation model to find the combination of The PV array and battery size at no latent storage and at various latent storage size. With latent storage, the size of the PV array and the battery capacity both decreased then it bring about the saving in PV array and battery. The refrigeration system at Energy Technology Division Laboratory was simulated with latent storage to study the system behavior and to determine the optimum latent material from the two criteria, its melting point and the capacity. Then the latent material should be water which is free or the hydrate of NaF and use the Container of plastic (it can resist any king of plastics), to retard the heat transfer because it m.p. lower than the operating temperature.
650		0	_aRefrigeration and refrigerating machinery
650		0	_aPhotovoltaic power generation
700	0		_aLasnier, France, _eChairpeson
700	1		_aBhattacharya, Sribas C., _eExamination Committee
700	0		_aReddy, T. A., _eExamination Committee
710	2		_aSupreme Command Headquarters, Royal Thai Ministry of Defence, _eScholarship Donor
810	2		_aAsian Institute of Technology. _tResearch studies project report ; _vno. ET-84-21
856			_3Full-Text _uhttp://203.159.5.9/ait-thesis/detail.php?q=B20709
907			_a.b10363634 _bmnait _cy
902			_a240610
998			_b2 _c951012 _dm _ea _fy _g0
945			_lmnait
945			_lmnait
945			_lmnarc
942			_c20
942			_c40
909			_aBarcode : 30050003122149 _bCREATED : 1995-10-14 _cRECORD # : i10453040 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
909			_aBarcode : 30050003122131 _bCREATED : 1995-10-14 _cRECORD # : i10453052 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
909			_aBarcode : 30050160016563 _bCREATED : 2016-03-31 _cRECORD # : i12916304 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
999			_c60998 _d60998