000 03509nam a2200397 4500
005 20260818144319.0
008 230798 th eng
035 _a.b10379538
099 9 _aAIT Thesis no.ST-91-10
100 1 _aIrawan, Paulus
245 1 0 _aInvestigation of confinement effects on concrete column by finite element method
260 _aBangkok :
_bAsian Institute of Technology,
_c1991
300 _a50, A-5 p.
490 1 _aThesis ;
_vno. ST-91-10
500 _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology
502 _aThesis (M.Eng.) - Asian Institute of Technology, 1991
520 _aMany investigations of confined concrete column have already been conducted in the past. However, since almost all investigations in the past are based on experiments alone, which do not give a clear understanding of mechanism of confined concrete column and are not unified, analytical study of the mechanism of confined concrete column was conducted by using three-dimensional Finite Element Analysis. The results fell between those from the formulations proposed by other researchers. Some experimental investigations were also conducted to verify the concrete material model and the result from Finite Element Analysis for steel-encased concrete columns. Three influencing factors to the strength and ductility, namely shape of lateral tie, volumetric ratio of lateral reinforcement to concrete core, ratio of spacing of lateral reinforcement to the width of concrete core, were studied. Three types of lateral reinforcement shape, circular tie, rectangular with cross tie and rectangular without cross tie, were studied. The circular tie is the most effective, and rectangular without cross tie is the least. The increment of volumetric ratio of lateral rein forcement to concrete core does not necessarily increase the strength and ductility of confined concrete column. It depends on the stress condition in the ties. The ratio of spacing of lateral reinforcement to the width of concrete core affects the strength and ductility in longitudinal and lateral directions. The smaller the ratio, the greater the confinement that can be mobilized to cross section far from lateral reinforcement and also the greater the mean stress level in the ties. Once the ties yield, strength and ductility increments will decrease.
650 0 _aFinite element method
650 0 _aColumns, Concrete
700 1 _aMaekawa, Koichi,
_eChairperson
700 0 _aWorsak Kanok-Nukulchai,
_eExamination Committee
700 1 _aKamol Vajarasathira,
_eExamination Committee
710 2 _aGerman Academic Exchange Service (DAAD), Federal Republic of Germany,
_eScholarship Donor
810 2 _aAsian Institute of Technology.
_tThesis ;
_vno. ST-91-10
856 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B17703
907 _a.b10379538
_bmnait
_cs
902 _a240402
998 _b2
_c951012
_dm
_ea
_fs
_g0
945 _lmnait
945 _lmnarc
942 _c22
942 _c40
909 _aBarcode : 30050120692313
_bCREATED : 2014-02-04
_cRECORD # : i12786329
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050160022629
_bCREATED : 2016-04-04
_cRECORD # : i12922171
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c64671
_d64671