000 03186nam a2200409 4500
005 20260818155558.0
008 290798 th eng
035 _a.b10449334
099 9 _aAIT Thesis no. ST-89-22
100 1 _aYahya, Anuar bin
245 1 0 _aModelling of shear resistance mechanism of concrete members with shear reinforcements
260 _aBangkok :
_bAsian Institute of Technology,
_c1989
300 _a189 p.
490 1 _aThesis ;
_vno. ST-89-22
500 _aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology
502 _aThesis (M.Eng.) - Asian Institute of Technology, 1989
520 _aExperimental data from previous studies were analyzed to model a shear resistance mechanism of concrete members. Using Li and Maekawa' s Contact Density Model for Cracks in Concrete, forces transferred at cracks for loading and unloading paths were obtained. Forces in the shear reinforcement and shear force in the compression zone were also quantified and summed up with forces transferred at crack to balance the external shear force . Beam tests were also carried out to study the contribution of the individual internal force components to resisting external shear force at loading and unloading stages. Measurements of crack dis placements, concrete strains in between shear cracks as well as compressive strains in the compression zone of the tested beams, which are of ordinary reinforced concrete and concrete sandwiched by steel plates , were meticulously taken using Demecgauge. While the internal forces balanced the external shear force for monotonic loading case , they did not perform as expected for the unloading case due to presence of residual forces in each component and positive strut angles at complete unloading . The shear resistance mechanism model derived for the monotonic loading case was proposed with a reducing factor in the concrete component .
650 0 _aConcrete construction
_xTesting
700 1 _aUeda, Tamon,
_eChairperson
700 1 _aKarasudhi, Pisidhi ,
_eExamination Committee
700 0 _aPichai Nimityongskul,
_eExamination Committee
710 2 _aUS - ASEAN,
_eScholarship Donor
810 2 _aAsian Institute of Technology.
_tThesis ;
_vno. ST-89-22
856 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B18134
907 _a.b10449334
_bmnait
_cs
902 _a240402
998 _b2
_c951012
_dm
_ea
_fs
_g0
945 _lmnait
945 _lmnait
945 _lmnarc
942 _c20
942 _c40
909 _aBarcode : 30050003064481
_bCREATED : 1995-10-15
_cRECORD # : i10562576
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050003064499
_bCREATED : 1995-10-15
_cRECORD # : i10562588
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050160068655
_bCREATED : 2016-08-04
_cRECORD # : i12932206
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c77751
_d77751