000 02817nas a2200409 a 4500
005 20260817161134.0
008 201209s2016 th u m rtt 000 a eng d
035 _a.b12298955
099 9 _aAIT Caps. Proj. no.IE-16-04
100 1 _aArachchige, Aruna Saranga P.W.
245 1 0 _a4-Axis CNC milling on impeller parts
260 _aPathum Thani :
_bAsian Institute of Technology,
_c2016
300 _a93 leaves :
_bill. (some col.) +
_e1 online resource
490 1 _aCaps. Proj. ;
_vno. IE-16-04
500 _aA capstone project submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Engineering Industrial Engineering, School of Engineering and Technology
502 _aCapstone Project (B.Sc.)-Asian Institute of Technology, 2016
520 _aThis project was carried out to generate G code for two designs of impellers. Sherline 4- axis CNC machine will be used to machining the required objects. CNC{u2019}s makings designs and prototyping is widely used for machining purpose. The G-code or NC code for these purposes can be generated in variety of ways. Siemens NX, MeshCAM, BobCAD are some of these. Few among common methods is to obtain the CL coordinates and use inverse kinematics to change the CL points into NC code using appropriate equations. The G code for this thesis was achieved using NX software. They can also use the software such as Microsoft excel to further obtain these results. I used Vericut software to drive the simulation and then the codes were simulated using Flashcut software. The machine worked during the milling was a Sherline 2010 mill and an external fourth axis was mounted with flat end mills and ball nose tool.
650 0 _aMilling-machines
_xNumerical control
650 0 _aMachine-tools
_xNumerical control
700 0 _aThan Lin,
_eChairperson
700 1 _aBohez, Erik L.J.,
_eExamination Committee
810 2 _aAsian Institute of Technology.
_tCaps. Proj. ;
_vno. IE-16-04
856 _3Full-Text
_uhttp://203.159.5.9/ait-thesis/detail.php?q=B14031
907 _a.b12298955
_bmnait
_cm
902 _a240411
998 _b0
_c201209
_dm
_ea
_fm
_g0
945 _lmnait
945 _lmnarc
945 _lmnarc
942 _c40
942 _c61
942 _c20
909 _aBarcode : 30050120884068
_bCREATED : 2019-03-18
_cRECORD # : i13160898
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : -
_bCREATED : 2019-03-18
_cRECORD # : i13160904
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
909 _aBarcode : 30050121015613
_bCREATED : 2020-09-12
_cRECORD # : i13314877
_dLPATRON : 0
_eLCHKIN : -
_f# RENEWALS : 0
_g# OVERDUE : 0
_hIUSE3 : 0
_iTOT CHKOUT : 0
_jTOT RENEW : 0
999 _c79
_d79