000			02881cas a2200385 a 4500
005			20260818171922.0
008			110910s1984 th uu|m rtt 0| a1eng d
035			_a.b10502671
099		9	_aAIT Thesis no.AE-84-16
100	0		_aWacharin Piyarat
245	1	0	_aPilot plant design for roller dried fish
260			_aBangkok : _bAsian Institute of Technology, _c1984
300			_a98 p.
490	1		_aThesis ; _vno. AE-84-16
500			_aA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Environment, Resources & Development
502			_aThesis (M.Eng.) - Asian Institute of Technology, 1984
520			_aThe study was divided into two parts, namely, the plant design for roller dried fish (RDF) production and the experimental work on drum drying. The design included the process design, the equipment selection, and the plant layout. The raw fish used was thread fin bream of 15-20 cm in length. To produce 300 kg RDF per day, 2580 kg of raw dish was required. To equilibrate suppliesd and prices, a buffer stock of two day production was recommended. Prior to drying at least 2.5% starch was added to mince to solve a problem associated with a relatively high fish oil content. The production rate was maximized by lowering the drum spacing and increasing the steam pressure and drum speed to the pint where the product quality was not impaired. The optimum drying conditions for producing product with 5% moisture are 10 atm steam pressure, 0.1 mm drum spacing, and 3 RPM drum speed. Under these condition, the production rate and the overall heat transfer coefficient were 12.1 kg/m2-hr and 950 w/m2 c̕, respectively. The product was in the form of small flakes, porous, white in appearance and could absorb water twice its weight. The cost of the product varied with the raw fish cost and output per year, ranging from $1900-$3300 per ton.
650		0	_aDried fish
700	1		_aKim, Kong-Hwan, _eChairperson
700	1		_aJindal, Vinod Kumar, _eExamination Committee
700	1		_aWee, Kok Leong, _eExamination Committee
710	2		_aGovernment of Australia, _eScholarship Donor
810	2		_aAsian Institute of Technology. _tThesis ; _vno. AE-84-16
856			_3Full-Text _uhttp://203.159.5.9/ait-thesis/detail.php?q=B20798
907			_a.b10502671 _bmnait _cs
902			_a240625
998			_b2 _c951012 _dm _ea _fs _g0
945			_lmnait
945			_lmnarc
942			_c22
942			_c40
909			_aBarcode : 30050120582548 _bCREATED : 2014-07-02 _cRECORD # : i1275903x _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
909			_aBarcode : 30050120303572 _bCREATED : 2016-05-25 _cRECORD # : i12992896 _dLPATRON : 0 _eLCHKIN : - _f# RENEWALS : 0 _g# OVERDUE : 0 _hIUSE3 : 0 _iTOT CHKOUT : 0 _jTOT RENEW : 0
999			_c88024 _d88024